Ampere v2.11

Ampere v2.11

Braintrapp – Freeware – Android
Neueste Version
v2.11
Sicher

Have you ever experienced a noticeable difference in charging speed when using different charger/USB cable sets? Now you can put this to the test with Ampere.

Ampere allows you to measure the charging and discharging current of your battery.

PRO features include:

  • Widgets
  • Notification
  • Alerts on device
  • Alerts on Android Wear

Please note that not all devices are supported due to the lack of an appropriate measurement chip or interface. You can find a list of unsupported phones at the end of the app description.

Please be aware that Ampere is not intended to be perfectly accurate in terms of milliamp (mA) measurements. Its main purpose is to help you evaluate which charger/USB cable combination works best for your device.

Please make sure to also read the FAQ: http://goo.gl/R8XgXX

To use Ampere, simply start the app and wait for approximately 10 seconds until the "measuring" message appears. It will then show you the charging or discharging current.

The current reading can be influenced by various factors such as the charger type (USB/AC/Wireless), the USB cable, phone type, current running tasks, display brightness, WiFi and GPS states.

While the measurements provided by Ampere may not be scientifically precise, they are sufficient for relative comparisons between different chargers and USB cables on the same device.

If Ampere constantly shows a reading of 0mA, please go to the settings and select the "Old measurement method" option. This will force the app to revert to the old measurement interface, if available on your Lollipop device.

However, please note that certain Samsung devices do not provide accurate measured values (e.g. S5), but rather display the maximum possible charging current based on the USB cable/charger configuration. This is a firmware issue.

Background info: Ampere measures the charging/discharging current of the battery. When your phone is not connected to a charger, the app will display the discharging current as a negative value. When a charger is connected, the current provided by the charger is used to power your phone and charge the battery with any remaining power.

For example, if your phone consumes 300mA without a charger connected (-300mA displayed), a 500mA charger will charge your battery with a maximum current of 200mA (200mA displayed).

Technical info: The displayed current value is an average derived from 50 measurements, excluding the 10 highest and lowest values. The displayed current may fluctuate or even reach zero due to unstable values provided by the Android system. Different companies use different battery types and other hardware, which makes it difficult to obtain accurate results for charger compatibility.

Please be aware that LiPo batteries do not draw the maximum charging current for the entire duration of the charging process. As the battery level approaches full charge, the charging current will decrease.

If you'd like more information on LiPo charge stages, you can refer to this graph: http://batteryuniversity.com/_img/content/ion1.jpg

You can also check out Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk

Phones/ROMS that are compatible only with the "Old measurement method" enabled and the correct "Measurement interface" selected:

  • HTC One M7 / M8
  • LG G3

Phones/ROMS reported to be not working with this app:

  • Galaxy Grand Prime - fortuna3gdtv
  • Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
  • Galaxy S3 - d2att, d2spr, d2vmu
  • Galaxy Tab4 7.0 - degas3g
  • HTC Desire 510 - htc_a11ul8x26
  • HTC One S (ville), X (endeavoru), XL (evita)
  • HTC Sensation 4G - pyramid

Please do not rate the app poorly if your phone is listed above. The issue lies with your phone's lack of support for this type of measurement, not with the app itself.

If Ampere does not work on your device with a pre-Lollipop Android version, please read the first and second posts in this XDA developer forum thread: http://goo.gl/pZqJg8. Make sure to include screenshots of your problem when posting in the XDA thread.

Please make sure to also read the FAQ: http://goo.gl/R8XgXX

Übersicht

Ampere ist eine Freeware-Software aus der Kategorie System & Utilities, die von Braintrapp entwickelt wird.

Die neueste Version von Ampere ist v2.11, veröffentlicht am 20.10.2017. Die erste Version wurde unserer Datenbank am 20.10.2017 hinzugefügt.

Ampere läuft auf folgenden Betriebssystemen: Android.

Die Nutzer haben noch keine Bewertung für Ampere gegeben.

Screenshots (Klicken, um zu vergrößern)

Verwandte Produkte


1Tap Cleaner (clear cache)

Review: The app offers a convenient way to clean cache files, default settings, and junk files from the SD card. It aims to provide more available storage space for your device. The app includes three main cleaning features.

Accu​Battery

AccuBattery provides battery usage information and measures battery capacity (mAh) based on scientific methods. BATTERY HEALTH Batteries have a limited lifespan.

Battery HD Pro

This battery monitor offers a simple and sophisticated solution for tracking your phone or tablet's battery performance. The tool can be customized to suit your device, ensuring accurate calibration.

Battery Master 12V

Battery Master serves as a specialized detection tool for lead-acid batteries. When installed, it efficiently assesses the battery's Cold Cranking Amps (CCA) and overall health condition.

Charge Meter

Charge Meter is a comprehensive app that allows you to accurately measure and monitor various aspects of your battery usage.

Charger Alert (Battery Health)

Are you looking to safeguard your Android device and preserve your battery health? Meet Charger Alert™, a battery saver application designed to help prolong your battery life and ensure optimal battery health.

DevCheck Device & System Info

DevCheck is a professional and comprehensive tool for monitoring your hardware in real time and obtaining complete information about your device.

GlassWire Data Usage Monitor

GlassWire is a comprehensive data usage monitoring app for Android that provides valuable insights into your mobile data usage, data limits, and WiFi network activity.

Global Search

Need to find a file that contains specific words in a large pile of files and folders on your computer? this program can help you find it quickly.For programmers, it can also help find sql server objects that contain specific words.One …

NetSpeed Indicator

A cleaner and simpler way to monitor network connection speed on your Android devices. NetSpeed Indicator displays your current internet speed in the status bar.

TravelRates - Money Converter

Money Converter - Simple Money Converter Lite Review The currency converter market continues to grow with the introduction of TravelRates, which positions itself as a straightforward option for the seasoned traveler.
Sichere, kostenlose Downloads geprüft von UpdateStar

Bleib up-to-date
mit UpdateStar Freeware.

Neueste Reviews

L Log Viewer Plus
Log Viewer Plus: Vereinfachen der Protokollverwaltung mit Stil
M mbFXWords
Revolutionierung des Vokabellernens mit mbFXWords
M Mines Flagger
Tauche ein in den klassischen Puzzle-Spaß mit Mines Flagger!
A Aiseesoft Video Repair for Mac
Stellen Sie Ihre Videos mit Leichtigkeit mit Aiseesoft Video Repair für Mac wieder her
A Autumn Fantasy
Tauchen Sie ein in die Schönheit des Herbstes mit Autumn Fantasy
I Invantive Query Tool
Müheloses Datenmanagement mit dem Invantive Query Tool
UpdateStar Premium Edition UpdateStar Premium Edition
Mit der UpdateStar Premium Edition war es noch nie so einfach, Ihre Software auf dem neuesten Stand zu halten!
Microsoft Visual C++ 2015 Redistributable Package Microsoft Visual C++ 2015 Redistributable Package
Steigern Sie Ihre Systemleistung mit Microsoft Visual C++ 2015 Redistributable Package!
Microsoft Edge Microsoft Edge
Ein neuer Standard beim Surfen im Internet
Google Chrome Google Chrome
Schneller und vielseitiger Webbrowser
Microsoft Visual C++ 2010 Redistributable Microsoft Visual C++ 2010 Redistributable
Wesentliche Komponente zum Ausführen von Visual C++-Anwendungen
Microsoft Update Health Tools Microsoft Update Health Tools
Microsoft Update Health Tools: Stellen Sie sicher, dass Ihr System immer auf dem neuesten Stand ist!

Neueste Updates


Hmanager 4.9.4

Hmanager by Aseel Sherwani: An In-Depth Review Hmanager, developed by Aseel Sherwani, is a comprehensive management tool designed to streamline various administrative tasks for businesses and organizations.

Retro Mode - Icon Pack (Neon) 1.13.0

This pixel art icon pack is crafted in Hamburg by pixel artist Moertel, offering a comprehensive collection for Android customization enthusiasts.

Hangman: in words with friends 18

The game "Gallows" is a well-known and engaging word game that challenges players' vocabulary and deductive skills.Gameplay Overview: In Gallows, players receive a prompt that contains a mystery word hidden within a designated field.

Royal Run 3.2.1

The Royal Run is set to take place on May 20, 2024, providing a unique opportunity for the Crown Prince to engage with the Danish public.

Neo Seguradora 2.1.28

Neo offers highly customizable plans, allowing you to select the services that are most relevant to your daily needs, eliminating limitations often found in standard packages. With Neo, you have full control over your coverage options.

Vertical Note - Notepad, Notes 1.1.6

Vertical Note is a notably efficient and streamlined notepad application that facilitates quick note-taking. Its user interface supports rapid entry and retrieval of notes, making it well-suited for users seeking a straightforward digital …